GRINDING THE DEPTH GAUGE LUGS
The incoming power must always be switched off.
Set the grinding angle (o° degrees); see under Grinding angle.
Check that the grinding wheel is not cracked and that it is securely fixed to the spindle.
Stop the grinding wheel immediately if abnormal vibrations occur.
Install the correct grinding wheel 1 (Fig G) for grinding the depth gauge lugs (6 mm). Profile the grinding wheel so that it matches the lugs 2. Adjust 3 back so that the grinding wheel 1 is aimed at the lug 2. (Apart from this, perform the adjustment in the same way as when adjusting the grinding of cutting links).
3 | 1 |
2
Fig H
13
