TRSM Installation | 9 |
LMM in slot 1
TRSM
TRSM |
Figure 6 Guiding an TRSM Module into a LANplex 6004
6Inject the TRSM into the chassis.
■If the system is powered on, when the Power/Unseat LED on the panel’s faceplate is yellow, inject the TRSM into the chassis by grabbing both ejector/injector handles and simultaneously push them inward. See Figure 7.
■If the system is not powered on, once you feel a slight resistance, inject the TRSM into the chassis.
7Relocate the inject handles back to their center position by gently pushing them inward. See Figure 7.
This locks the TRSM into the chassis. The Power/Unseat LED lights green when the TRSM is seated.
