3Com WL-548A manual About This Guide, 3Com WX1200, 3Com PoE Injector, 3Com WXR100

Models: WL-548A

1 14
Download 14 pages 49.53 Kb
Page 1
Image 1
Quick Installation Guide

Quick Installation Guide

3Com® AirProtect Sensor 5750

3CRWX5750GS / Model WL-548A

The 3Com® AirProtect Sensor 5750 provides dual-radio IEEE 802.11a and 802.11b/g wireless intrusion prevention (WIP) capability for your network. The sensor is designed for use with a 3Com AirProtect WIPS Engine 6100, and requires hardware installation only. You must have a 3Com AirProtect Engine 6100 installed on your network to operate the sensor.

Power is supplied using Power Over Ethernet (PoE). The following 3Com PoE devices, or any third- party 802.3af compliant PoE solution, may be used to supply power to the sensor:

3Com WX1200

3Com PoE Injector

3Com WXR100

Any 3Com 802.3af compliant PoE Switch

About This Guide

This Quick Installation Guide describes the basic setup of the sensor. It covers the following topics:

3Com AirProtect Sensor 5750 Features

Observing Safety Precautions

Step 1: Unpacking the Sensor

Step 2: Preparing for Installation

Step 3: Attaching the Antennas

Step 4: Mounting the Sensor

Step 5: Connecting Power and the Network

Step 6: Checking the LED Indicators

Troubleshooting

Regulatory Information

Page 1
Image 1
3Com WL-548A manual About This Guide, 3Com WX1200, 3Com PoE Injector, 3Com WXR100, 3Com AirProtect Sensor