3Com WL-548A manual 3Com AirProtect Sensor 5750 Features, Description

3Com AirProtect Sensor 5750 Features

2			1
	3	4	5

1

6

7 8

	Feature	Description
1	Antenna	Two RSMA type antenna connectors allow you to connect antennas
	Connectors	that operate in 2.4 GHz and 5.0 GHz bands.
2	LEDs	The LEDs indicate power and activity. See “Checking the LED
		Indicators” on page 8 for details.
3	Ethernet Port	The Ethernet port provides a 10/100BASE-TX Ethernet connection to a
		3Com Wireless LAN switch. The connection can be direct to a 3Com
		switch or indirect through an intermediate Layer 2 or Layer 3 network.
		Use a standard Category 5 cable with straight-through signaling and
		standard RJ-45 connectors to connect the sensor to the switch on the
		network.
4	Serial Port	The serial port is not used for basic sensor operations.
5	Reset Button	To restore factory settings, press the reset button during power-up by
		inserting a pointed object into the reset hole on the back of the sensor
		and holding for at least 20 seconds.

6Kensington lock connector

7Detachable rear-panel cover

8	Mounting Bracket The mounting bracket comes attached to the sensor and allows the
	unit to be mounted on a wall or ceiling.

2