Instruction Sheet
Phaser® 340
Phaser® 340 Plus
PhaserLink™ Upgrade for the Phaser 340 — Upgrade Kit Z340PL
This kit provides the components to give your printer PhaserLink™ capabilities. With PhaserLink firmware installed in your printer you can monitor and administer your printer using a World Wide Web browser. Printer’s
Network card firmware version. Your printer must have PhaserShare™ Version 2.0 (or higher) firmware installed on its Ethernet or TokenRing network card to run PhaserLink software. The printer’s configuration page indicates the PhaserShare firmware level (see the next page to print out the configuration page). If your printer does not have Version 2.0 PhaserShare software, you can upgrade your printer’s network card with either the 4676UP1 Upgrade kit (for the Ethernet network card) or the 4676UP4 Upgrade Kit (for the TokenRing network card). Install the Z340PL Upgrade Kit first.
The PostScript Code ROM SIMM replaced by this upgrade kit must be returned to Tektronix; otherwise, you will be invoiced for the unreturned ROM SIMM. Instructions for returning the ROM SIMM are provided at the end of this instruction sheet.
Contents
■Print engine ROM, Opt. 1: p.n.
Print engine ROM, Opt. 2: p.n.
■PostScript ROM SIMM: p.n.
PostScript ROM SIMM, KANJI: p.n.
■Return shipping packaging and label (for the ROMs)
■
■ROM puller tool
■Printer user manual, driver manual, disks and
On-site installation
Professional,
Don’t install this upgrade, if you are not comfortable modifying electronic equipment.
Copyright © 1996 by Tektronix, Inc. All rights reserved. |