PhaserLink™ Upgrade for the Phaser 340 — Upgrade Kit Z340PL
Replacing the PostScript code ROM SIMM
3.Remove the currently installed PostScript code ROM SIMM in connector P71 by spreading apart the
4.Insert the new PostScript code ROM SIMM in connector P71 (a), and tilt the SIMM down until it locks in place (b). The part number
When properly inserted, a tab on each end of the connector slips into a hole on each end of the code ROM SIMM. Also, a pawl on each end of the connector latches around each end of the SIMM to lock it in place.
Code ROM SIMM
Main board
ab
4