MB DMX™

General Information

General Instructions: To optimize the performance of this product, please read these operating instructions carefully to familiarize yourself with the basic operations of this unit. These instructions contain important safety information regarding the use and maintenance of this unit. Please keep this manual with the unit, for future reference.

Unpacking: Thank you for purchasing the MB DMX™ by American DJ®. Every MB DMX™ has been thoroughly tested and has been shipped in perfect operating condition. Carefully check the shipping carton for damage that may have occurred during shipping. If the carton appears to be damaged, carefully inspect your fixture for any damage and be sure all accessories necessary to operate the unit has arrived intact. In the case damage has been found or parts are miss- ing, please contact our toll free customer support number for further instructions. Do not return this unit to your dealer without first contacting customer support.

Introduction: The MB DMX™ is a unique intelligent mirror ball motor that may be operated in three modes; DMX-512, Stand-Alone, or Master/ Slave. The MB DMX™ allows you to control the operation of a mirror ball motor as well as the lamps via DMX operation. You may also link several MB DMX™ motors together to obtain universal speed and rotation. An optional MINI/C black out controller may be purchased separately.

Customer Support: American DJ® provides a toll free customer support line, to provide set up help and to answer any question should you encounter problems during your set up or initial operation. You may also visit us on the web at www.americandj.com for any comments or suggestions. Service Hours are Monday through Friday 9:00 a.m. to 5:00 p.m. Pacific Standard Time.

Voice:

(800) 322-6337

Fax:

(323) 582-2610

E-mail:

support@americandj.com

Warning! To prevent or reduce the risk of electrical shock or fire, do not expose this unit to rain or moisture.

Caution! There are no user serviceable parts inside this unit. Do not attempt any repairs yourself, doing so will void your manufactures warranty. In the unlikely event your unit may require service please contact your nearest American DJ® dealer.

MB DMX™

Safety Precautions
Safety Issues:

•To reduce the risk of electrical shock or fire, do not expose this unit rain or moisture

•Do not spill water or other liquids into or on to your unit

•Do not attempt to operate this unit if the power cord has been frayed or broken

•Do not attempt to remove or break off the ground prong from the electrical cord. This prong is used to reduce the risk of electrical shock and fire in case of an internal short

•Disconnect from main power before making any type of connection

•Do not remove the cover under any conditions. There are no user serviceable parts inside

•Never plug this unit in to a dimmer pack

•Always be sure to mount this unit in an area that will allow proper ventilation. Allow about 6” (15cm) between this device and a wall

•Do not attempt to operate this unit, if it becomes damaged

•This unit is intended for indoor use only, use of this product outdoors voids all warranties

•During long periods of non-use, disconnect the unit’s main power

•Always mount this unit in safe and stable matter

•Power cords should be routed so they are not likely to be walked on, pinched by items placed upon or against them.

•Heat -The appliance should be situated away from heat sources such as radiators, heat registers, stoves, or other appliances (including amplifiers) that produce heat.

•The fixture should be serviced by qualified service personnel when:

A.The power-supply cord or the plug has been damaged.

B.Objects have fallen, or liquid has been spilled into the appliance.

C.The appliance has been exposed to rain or water.

D.The fixture does not appear to operate normally or exhibits a marked change in performance.

©American DJ® - www.americandj.com - MB DMX™ Instruction Manual Page 3

©American DJ® - www.americandj.com - MB DMX™ Instruction Manual Page 4