Important Safeguards (Continued)
The "Safety Instructions" and "Air Pressure" labels, shown in Figure 1-8, reminds operator or service personnel of the recommended air pressure required and location of On/Off air valve.
Figure 1-8 – Air Pressure Label
The "Notice – Taping Head Latch"label, shown in Figure 1-9, is attached to the top surface of the upper, left belt guard at the front edge of the taping head. The label reminds operators and service personnel to keep latch down except to remove taping head.
Figure 1-9 – Upper Taping Latch Label
The "Notice – Raise and Lower Upper Drive Assembly" label, shown in Figure 1-10 is attached to the left column guard at the location of the mechanical latch. The label provides instructions on raising, latching/unlatching and lowering the upper drive assembly.
Figure 1-10 – Upper Taping Latch Label
