3M 39600 manual Specifications

Specifications

1.Power Requirements:

Electrical – 115 VAC, 60 Hz, 3.8 A (440 watts)

Pneumatic – 5 bar gauge pressure [70 PSIG]

110 litre/min @ 21° C, 1.01 bar [3.75 SCFM] at 15 boxes per minute A pressure regulator is included

The machine is equipped with two 1/6 HP gearmotors and comes with an 2.4 m [eight foot] standard neoprene covered power cord and a grounded plug. Contact your 3M Representative for power requirements not listed above.

2.Operating Rate:

Up to 15 boxes per minute. Actual production rate is dependent on box size, box size mix, and operator dexterity.

Box drive belt speed approximately 0.4 m/s [78 FPM]

3.Operating Conditions:

Use in dry, relatively clean environments at 4° to 50° C [40° to 120° F] with clean, dry, boxes.

Note – Machine should not be washed down or subjected to conditions causing moisture condensation on components.

4.Tape:

ScotchTM brand pressure-sensitive film box sealing tapes.

5.Tape Width:

36 mm or 1 1/2 inch minimum to 50 mm [2 inch] maximum

6.Tape Roll Diameter:

Up to 405 mm [16 inch] maximum on a 76.2 mm [3 inch] diameter core. (Accommodates all system roll lengths of ScotchTM brand film tapes.)

7.Tape Application Leg Length – Standard: 70 mm ± 6 mm [2 3/4 inch ±1/4 inch]

Tape Application Leg Length – Optional:

(See "Special Set-Up Procedure", page 29) 50 mm ± 6 mm [2 inch ±1/4 inch]

(Specifications continued on next page)

7