WARNING
To reduce the risk associated with hazardous voltage:
Do not attempt to modify or repair — no user serviceable parts inside — contact 3M Service for repair.
To reduce the risk associated with back strain related injury:
Follow safe lifting procedures.
To reduce the risk associated with a fall or machine tipping related injury:
Do not step or lean on any part of the Conversion Station.
CAUTION
To reduce the risk associated with eye related injury:
Do not look directly into laser scanner device;
At the end of service life, dispose of the laser scanner in accordance with federal, state and local requirements.
To reduce the risk associated with environmental contamination related injury:
The Conversion Station contains a lithium battery, mercury in the monitor/display, and circuitry that contains lead in the solder. At the end of service life, dispose of the Conversion Station in accordance with federal, state and local requirements.
IMPORTANT NOTES
Do not bend, fold, or damage the RFID tag in any way.
Such damage increases the likelihood of premature tag failure.
A rejected tag is identified with a hole punched through it. Do not use tags with holes in them.
If you receive a system message indicating that a tag cannot be programmed, that tag may be defective. Ask your conversion coordinator where to put any tags that are suspected of being un-
programmable.
IMPORTANT NOTE
The Code of Federal Regulations (CFR) 21CFR1040.10 requires the following statement for products containing lasers:
3
