Using the Tag Dispenser
IMPORTANT NOTES
Do not bend, fold, or damage RFID tags because this may cause premature tag failure.
If you discover a tag with a hole punched through it, do not use the tag. A hole indicates that the tag was identified as defective during inspection.
If you receive a system message indicating that a tag cannot be programmed, ask your conversion coordinator where to put these tags.
Automatic Tag Dispenser components
The Automatic Tag Dispenser consists of the following components
ACurved steel spring guide plate
BTwo plastic core inserts
CSupply roll shaft
DStop lever
E
FTag dispenser switch
A
B
C 
D
E
F
7
