3M manual Instructions, 3M Cold Shrink QS-IIISplicing Kit 5797A-MT, 78-8126-0432-6-A

Cold Shrink QS-III

Three-Conductor Splice Kit for use on Armor and Non-Armor Cables

Instructions

IEEE Std. 404 35 kV Class 250 kV BIL

Cable Range Requirements

Kit Number	Cable Insulation	Conductor
	O.D. Range	Size Range
5797A-MT	1.07" to 1.70"	1/0 AWG - 350 kcmil*
	(27,2 mm to 43,2 mm)	(60 - 185 mm2)

*Splices (including size transitions) can be made to smaller or larger conductors, provided both cables are within the Insulation O.D. Range and the connector meets the dimensional requirements shown below.

Connector Dimensional Requirements

	Minimum	Maximum
	inches (mm)	inches (mm)
Outside Diameter	0.51" (13,0 mm)	1.70" (43,2 mm)
Length
Aluminum (Al/Cu)	------	6.00" (152 mm)
Length
Copper (Cu)	------	6.50" (165 mm)

3M™ Cold Shrink

QS-III Splicing Kit

5797A-MT

78-8126-0432-6-A

CAUTION

Working around energized high-voltage systems may cause serious injury or death. Installation should be performed by personnel familiar with good safety practice in handling high-voltage electrical equipment. De-energize and ground all electrical systems before installing product.