3M 78-8126-0432-6-A Kit Contents, Prepare Cable, Place Components on Cable, Install Splice

Models: 5797A-MT 78-8126-0432-6-A

1 12

Page 2

Contents
1.0	Kit Contents	3
2.0	Prepare Cable	3
3.0	Place Components on Cable	5
4.0	Install Splice	6
5.0	Install Armor Continuity (if cable is armored)	8
6.0	Install Splice Jacket	9

78-8126-0432-6-A

Image 2

Contents

Instructions Connector Dimensional RequirementsCold Shrink QS-III 3M Cold Shrink QS-IIISplicing Kit 5797A-MTInstall Splice ContentsKit Contents Install Armor Continuity if cable is armored1.0Kit Contents 2.0Prepare CableConnector Size Aluminumend going on the cable first, away from cable end 3.0Place Components on Cable3.1Slide one large cold shrink jacket tube onto cable end4.0Install Splice 254 mm measured from the CENTER of connectorsNote DO NOT use silicone grease constant force spring 5.0 Install Armor Continuity If Cable is Armoredconnect ground wires 33+ vinyl tape 6.0Install Splice Jacket Bind the final wrap in place with vinyl tape Number ConnectorCrimping Tool - Die Sets number of crimps/end AWG or3M IPC 2002 78-8126-0432-6-A Electrical Products DivisionIMPORTANT NOTICE