Important notes, Important Notes | 3M 803 specification

Image 7

3M 803 owner manual Important notes, Important Notes, Be careful not to damage the Handheld

Contents

Copyright 2003-2010 3M. All rights reserved Track and Trace SolutionsHandheld RFID Reader Model Owner’s Manual 78-8126-8363-5 Rev C 3M Handheld RFID Reader Model 803 Owner’s Manual2003-2010 3M. All rights reserved 3M is a trademark of 3M Handheld RFID Reader Safety informationBattery Management Requesting servicePage EXPLANATION OF SIGNAL WORD CONSEQUENCES Safety informationIntended use Attention Read accompanying documentation Risk of Electric Shock To reduce the risk associated with fire and explosion Safety messages IMPORTANT NOTES Do not over tighten the antenna adjustment screwAlways use the Change Battery function when you change the battery Important notes PWR COM/STATUS Safety label locationsN1108 Model FCC Intentional Radiator Certification EMC, USA, and Canada complianceJapan FCC Radio Frequency Rules and Regulations Getting started Using the 3M Handheld RFID Reader for the first timeStep 2 - Charge the battery and insert it into the Handheld 1 See Charging the battery on page a battery SpecificationsBattery type Battery charger Adjustment Handheld componentsFigure 1 Handheld components Antenna Indicator Lights Scroll Buttons Menu Buttons Antenna Figure 2 The Handheld includes a menu-driven display screen Controls and indicators 2 - Insert the memory card 1 - Install a pull tab on the memory cardDatabase Errors Inserting the memory card Removing the memory card Procedure Figure 6 Handheld reset button Resetting the HandheldTo reset the Handheld If pressing the reset button did not work… Figure 7 If the Handheld displays database Formatting a memory card Using the 3M Handheld RFID Reader for the first time Adjusting the antennaCleaning the Handheld Figure 8 Use the antenna adjustment tool to adjust the antenna Figure 9 Battery charging system Battery ManagementBattery charging guidelines Battery use Battery Charger Status Light Charging the batteryTo charge a battery a Connect the power supply output to the charger stand Figure 12 Before removing a battery, select Change Battery Replacing the batteryRemoving the battery Installing the battery For software support Requesting service3M Service phone numbers For service Stock Number Ordering replacement partsDescription