Handheld components, Important Note, Adjustment, Screw

Image 12

3M 803 Handheld components, Important Note, Be careful not to damage the Handheld, Adjustment, Screw, Trigger, Battery

Contents

Track and Trace Solutions Handheld RFID Reader ModelOwner’s Manual Copyright 2003-2010 3M. All rights reserved 3M Handheld RFID Reader Model 803 Owner’s Manual 2003-2010 3M. All rights reserved3M is a trademark of 3M 78-8126-8363-5 Rev C Safety information Battery ManagementRequesting service Handheld RFID ReaderPage Safety information Intended useAttention Read accompanying documentation Risk of Electric Shock EXPLANATION OF SIGNAL WORD CONSEQUENCES Safety messages To reduce the risk associated with fire and explosion Do not over tighten the antenna adjustment screw Always use the Change Battery function when you change the batteryImportant notes IMPORTANT NOTES Safety label locations N1108Model PWR COM/STATUS EMC, USA, and Canada compliance JapanFCC Radio Frequency Rules and Regulations FCC Intentional Radiator Certification Using the 3M Handheld RFID Reader for the first time Step 2 - Charge the battery and insert it into the Handheld1 See Charging the battery on page Getting started Specifications Battery typeBattery charger a battery Handheld components Figure 1 Handheld componentsAntenna Indicator Lights Scroll Buttons Menu Buttons Antenna Adjustment Controls and indicators Figure 2 The Handheld includes a menu-driven display screen 1 - Install a pull tab on the memory card Database ErrorsInserting the memory card 2 - Insert the memory card Procedure Removing the memory card Resetting the Handheld To reset the HandheldIf pressing the reset button did not work… Figure 6 Handheld reset button Formatting a memory card Figure 7 If the Handheld displays database Adjusting the antenna Cleaning the HandheldFigure 8 Use the antenna adjustment tool to adjust the antenna Using the 3M Handheld RFID Reader for the first time Battery Management Battery charging guidelinesBattery use Figure 9 Battery charging system Charging the battery To charge a batterya Connect the power supply output to the charger stand Battery Charger Status Light Replacing the battery Removing the batteryInstalling the battery Figure 12 Before removing a battery, select Change Battery Requesting service 3M Service phone numbersFor service For software support Ordering replacement parts Stock NumberDescription