Check the 3MTM Bair PawsTM system website to ensure you have the most recent version of this document.

www.bairpaws.com reorder #202391A

Mounting the Warming Unit with a Rail-mount to the Wall

CAUTION: The rail-to-wall bracket is intended for use only with a Bair Paws 800 series warming unit.

1.If the warming unit is not already connected to the rail-mount, slide the clip on the back of the warming unit into the groove of the rail-mount. The assembly will click when the clip is fully seated in the rail-mount.

2.Hook the warming unit with the attached rail-mount to the rail-to-wall bracket.

3.Lift the warming unit straight up to remove it from the rail-to-wall bracket.

Rail-to-wall bracket

Rail-mount

10

Bair Paws Model 875 Warming Unit Operator’s Manual