Check the 3MTM Bair PawsTM system website to ensure you have the most recent version of this document.

www.bairpaws.com reorder #202391A

Mounting the Warming Unit with a Suction Wall Mount Adapter

1. Slide the Bair Paws suction wall mount adapter into the suction wall bracket. If the adapter is too large to fit, remove the expand spacer.

2. Increase the expander on the Bair Paws suction

wall mount adapter by gently turning the screw counter clockwise until the adapter is securely fastened (torque < 10 in-lbs). The adapter

should not be able to move in any direction within the suction wall bracket once fastened.

CAUTION: Overtorquing may cause device damage.

CAUTION: To prevent pinching, only hold the front of the adapter when increasing

decreasing the expander.

3. Slide the Bair Paws 875 warming unit into the suction wall mount adapter.

11

English  202391A