26 | M150 FPD Monitor Installation Guide |
You can use the Position option to center the image on the display manually. Use the ◄/left and ►/right arrow buttons to scroll through the position menu.
•
•
Image
Use the ◄/left and ►/right arrow buttons to scroll through the image menu.
Phase: If the phase of your monitor is not
If you change your display to Windows shut down mode, this noise will be more visible, and easier to eliminate. Click on the "Start" button at the bottom right side, and then click Shut Down. This will bring you to the Windows shutdown mode. After finishing phase adjustment, click on the "Cancel” to return to your original Windows display.
Clock: If the clock setting of your image is not
Adjust this setting so that either the vertical bars of noise are replaced by an even amount of noise across the whole screen, or the noise disappears completely.
If you do an Auto Config, the monitor will try to find the best Clock/Phase setting. If you are not satisfied with the auto adjustment,