Rear Edge of 
Base Not Shown
M150 Base Plate Mounting Template | Cut Line |
(Drawn actual size) |
|
3M Touch Systems Proprietary Information |
|
Place this template on mounting surface and drill three holes as shown for mounting screws. The screw heads must be smaller than 0.39" (10 mm) and larger than 0.21" (5.5 mm).
Adjust height of screw heads to securely lock monitor in place. This height is about 0.23" (6 mm).
Drill 3 Mounting Holes
0.39" (10 mm)
0.21" (5.5 mm)
Front Edge of Base
