3M MP7750, MP7650 Turning On The Power, Precautions, Make sure that the power cord is firmly and

TURNING ON THE POWER

Precautions

Connect all devices to be used to the projector prior to turning on the power. 8 ～ 12

WARNING When the power is ON, a strong light is emitted. Do not look into the lens.

LASER

INDICATOR

STANDBY/ON VIDEO RGB

UP

FOCUS ZOOM PAGE

DOWN

1	Make sure that the power cord is firmly and
	correctly connected to the projector and outlet
	3

BLANKLASER

Turn on the projector's power

2 Set the power switch to [ ] (ON). The STANDBY/ON indicator will light to solid orange.

power switch

Control panel

STANDBY/ON indicator

NOTE Turn the power on/off in right order.

•Power on the projector before the computer or video tape recorder.

•Power off the projector after the computer or video tape recorder.

3 Press the STANDBY/ON button (control panel or remote control)

•The projector begins warming up and the STANDBY/ON indicator blinks green.

	• The STANDBY/ON indicator stops blinking	STANDBY/ON
	and lights to solid green once the
	projector's power is completely on.
4	Remove the lens cap
	The picture is projected.

15