3M MP8660 manual Control Cable 3rd Party Control Box, Serial Mouse Cable PC Computer

ENGLISH

￿Note

Operating the mouse functions through the MP8660 remote control may disable the internal pointing device (IPD) on your computer. It is recommended that you review the operating instructions for your computer before connecting an external device of any kind.

Serial Mouse Cable (PC Computer):

Install the serial mouse cable (Figure 3-10) to connect the serial mouse port on your computer to the mouse I/F terminal on the MP8660 projector. A serial mouse driver must be loaded on your PC computer for this function to operate properly. It is best to reference the operating instructions for your computer before connecting an external mouse device of any kind.

Com	Mouse I/F
Mouse
Port	Terminal
	Serial Mouse Cable

Figure 3-10. PC Serial Mouse Cable

To load a serial mouse driver on a computer using Microsoft￿ Windows￿ or Windows for Workgroups, go into the Windows Setup function. From Program Manager click Main; then click Windows Setup; (note the current mouse driver that is loaded); click Options; click Change System Settings. Choose Mouse. You will need to have the Serial Mouse on Comm 1 driver loaded. It will most likely be listed as Serial or Bus Mouse. Click OK to apply the serial mouse driver. Restart Windows if prompted.

Hint: To load a serial mouse driver on a computer using Microsoft￿Windows￿95, go into the Control Panel. Click Start; select Settings; select Control Panel. Click on Mouse; select the General tab; (note the current mouse driver that is loaded); select Change; select Show all compatible devices; (note the current Manufacturer and Model); select Standard Mouse Type for Manufacturer; select Standard Serial Mouse. Click OK to apply the serial mouse driver. Restart windows when prompted.

PS/2 Mouse Adapter Cable (PC Computer):

Install a PS/2 mouse adapter cable (Figure 3-11) to
the serial mouse cable to complete the mouse	PS/2	PS/2	Mouse I/F
emulation connection for a PS/2 computer.	Mouse	Mouse
			Terminal
	Port	Adapter	Serial Mouse Cable
		Cable
	Figure 3-11. PS/2 Mouse Adapter Cable
ADB Mouse Adaptor Cable (MAC Computer):
Install an ADB mouse adapter cable (Figure 3-12) to
the serial mouse cable to complete the mouse
emulation connection for a MAC computer.	ADB	ADB
			Mouse I/F
	Mouse	Mouse
			Terminal
	Port	Adapter
			Serial Mouse Cable
		Cable

Figure 3-12. ADB Mouse Adapter Cable

Control Cable (3rd Party Control Box):

Install the RS-232 control cable (Figure 3-13) from the RS-232 port on the computer to the RS-232 terminal on the projector. This connect will provide the communication between the MP8660 and a 3rd Party Control Box. See the Technical Appendix for the valid Serial Interface Command Codes which will control projector functions.

Com	RS-232 I/F
Mouse	Terminal
Port	RS-232 Control Cable

Figure 3-13. RS-232 Control Cable

8	￿	Multimedia Projector MP8660	E 3M 1997
	3M