3M MP8660 manual How to Operate the Remote Control, Remote Control Buttons

Section 5: Remote Control

5-1. How to Operate the Remote Control

The remote control keypad (Figure 5-2) controls basic projector functions.

To use the remote control:

a.Aim the remote toward the projection screen or at the back of the projector (Figure 5-1).

b.Press the desired button and the signal will bounce off of the screen to the front sensor or directly enter the back sensor.

The function of each remote control button is explained below.

Figure 5-1. Using the Remote Control

Remote Control Buttons

	Press STANDBY/ON to switch projector between projection and
	standby mode. In projection mode the lamp is ON. In standby mode
	the lamp is OFF.
BLANK	Press BLANK to display a black background with no image. Press
	again to return the image to the screen.
	Press MUTE to switch the audio sound ON or OFF.
ZOOM	Press ZOOM (￿B) to increase or decrease the size of the screen
	image.
FOCUS	Press FOCUS (￿B) to increase or decrease the sharpness of the
	screen image.
VOLUME	Press VOLUME (￿B) to adjust internal/external speaker volume.
	Press BACK LIGHT to light the remote buttons.
BACK
LIGHT
RGB	Press RGB to switch computer video input (RGB1 ⇒ RGB2 ⇒
	RGB1).
MENU	Press MENU to display the on±screen menus. Move the mini±joy
	stick up/down or left/right as needed to nagivate the menu options.
	Note: Press SELECT to choose the option that is highlighted.
	Press SELECT (L) to choose the highlighted menu option. Refer to
	On±Screen Menus in Section 4.
	Press RESET to reset menu options to the factory default setting.
RESET
	Refer to On±Screen Menus in Section 4.

Video	Press VIDEO to switch between video inputs (VIDEO1 ⇒ VIDEO2				⇒
	VIDEO1).
					Figure 5-2. Remote Control
￿ 3M 1997		3M	￿	Multimedia Projector MP8660	17

ENGLISH