3M™ Micro Professional Projector MPro110
b.3M product is designed to operate in the typical indoor environment. This warranty does not cover 3M product used outside of the following circumstances:
•100V–240V AC, 50/60 Hz
•
•10–80% RH (without condensation)
•
c.The air intake and exhaust vent must be clear of obstructions. Inadequate air ventilation will cause the 3M product to malfunction or will cause damage to the 3M product which will void the warranty.
d.This warranty does not cover any additional costs including, but not limited to, those associated with removal, cleaning or installation of the 3M product, adjustments, (mechanical or electronic) made to the 3M product.
e.This warranty covers only normal use of the product.
f.This warranty does not cover consumables (e.g., fuses), other than lamps and only as set forth below.
g.This warranty is not transferable.
h.3M is not responsible for warranty service should the 3M label or logo or the rating label or serial number be removed unless otherwise stated in writing for the purposed of private labeling for partnership requirements.
i.This warranty does not cover postage, insurance, or shipping costs incurred in presenting your 3M product for warranty service. Said costs are the customer’s responsibility. If a claimed defect cannot be identified or reproduced in service, the customer may be held responsible for cost incurred. Should your warranty upgrade include a “change out” service and the claimed defect cannot be identified or reproduced by the technician, the customer will be responsible for call out costs.
FAILURE TO FOLLOW THE INSTRUCTIONS CONTAINED IN THE APPROPRIATE 3M product MANUAL OR TO USE THE 3M PRODUCT IN ACCORDANCE WITH 3M’S
INTENDED USE STATEMENT, WILL VOID ALL WARRANTIES AND LIMITED REMEDIES.
Operator’s Guide
© 2008 3M. All Rights Reserved. | 17 |
