Multifunctional settings
SETUP menu
With the SETUP menu, items shown in the table below can be performed.
Choose an item using the cursor buttons ▲/▼ on the projector or remote control, and press the cursor button ► on the projector or remote control, or the ENTER button on the remote control to progress. Then perform it referring to the following table.
MENU [RGB] |
| :SELECT |
PICTURE | ZOOM | 100 |
IMAGE | KEYSTONE | +0 |
INPUT WHISPER NORMAL
SETUP MIRROR NORMAL
SCREEN VOLUME 16 OPTION
EASY MENU
Item | Description | |
ZOOM | Using the buttons ▲/▼ adjusts the zoom (magnifying power). | |
Large Small | ||
| ||
| Using the buttons ▲/▼ corrects the keystone distortion. | |
| Upper in the data Lower in the data | |
| • The adjustable range of this function will vary with the type of input | |
| signal. At some signals, this function may not work well. | |
KEYSTONE | • When the V:INVERT or the H&V:INVERT is selected under the | |
| item MIRROR, if the projector screen is inclined or if the projector is | |
| angled downward, this function may not work correctly. | |
| • When the zoom adjustment is set to the TELE side, this correction | |
| may be excessive. This function should be used with zoom set to | |
| WIDE whenever possible. | |
| Using the buttons ▲/▼ turns off/on the whisper mode. | |
WHISPER | NORMAL WHISPER | |
• When the WHISPER is selected, acoustic noise and screen | ||
| ||
| brightness are reduced. | |
| Using the buttons ▲/▼ switches the mode for mirror status. | |
MIRROR |
| |
| NORMAL H:INVERT V:INVERT H&V:INVERT | |
VOLUME | Using the buttons ▲/▼ adjusts the volume. | |
High Low | ||
|
34
