Connecting power supply

3M™ Digital Projector S55i/X55i

Setting up

WARNING ►Please use extra caution when connecting the power cord, as incorrect or faulty connections may result in ﬁre and/or electrical shock.

•Only use the power cord that came with the projector. If it is damaged, contact your dealer to newly get correct one.

•Only plug the power cord into an outlet rated for use with the power cord's speciﬁed voltage range.

•Never modify the power cord. Never attempt to defeat the ground connection of the three-pronged plug.

AC inlet

Connector

of the power cord

Connect the connector of the power cord to the AC inlet of the projector.

Firmly plug the power cord's plug into the outlet.

14	© 3M 2005. All Rights Reserved.

Page 14

Image 14

Contents

Trademark acknowledgment About this manualThank you for purchasing this projector Content About contents of package Part names Projector CB/PB ComponentVideo ports 13 CR/PR Magnify Remote controlControl buttons Setting up Fastening the lens cover For the model ArrangementFor the model S55i Adjusting the projectors elevator Using the Security Bar How to attach Connecting your devices About Plug-and-Play capability Examples of connection with a computer Connecting to a monitor outputConnecting to a speaker with ampliﬁer output Audio L out Audio cable Examples of connection with a VCR/DVD playerAudio R out Connecting power supply Remote control Putting batteries Using the remote control Turning off the power Power on/offTurning on the power STANDBY/ON Power Operating Adjusting the volumeSelecting an input signal Temporarily muting the sound Selecting an input signal Searching an input signalAdjusting the zoom and focus Selecting an aspect ratio  For an RGB signal Using the automatic adjustment featureAdjusting the position  For a video signal or s-video signal Using the magnify feature Correcting the keystone distortions Freezing the screen Temporarily blanking the screen USB mouse and keyboard control Available function Remote control operationOperating the computer screen Easy Menu Multifunctional settingsUsing the menu function Advanced Menu Easy Menu Mirror ResetEasy Menu Filter Time Picture Menu Gamma Color Temp Picture MenuHigh  Middle  LOW  Custom Secam LOAD1  LOAD2  LOAD3  LOAD4 TV  Film  Turn OFFProgressive SAVE4 SAVE3  SAVE2  SAVE1 Over Scan PhaseImage Menu Position Size Auto AdjustImage Menu Execute Video Format Input MenuColor Space Frame Lock Input Menu Information Audio Setup MenuVolume OSD Bright Screen MenuMenu Position Bright  Dark MyScreen Screen MenuStart UP MyScreen Lock Message No Input is Detected Auto Search Reset  CancelOption Menu Auto OFF Option Menu Maintenance Lamp Type number = Case of replacement by yourselfLamp Air ﬁlter Air ﬁltre Page Related messages There is no input signalInternal temperature is rising Is out of the response parameter range of this unit Regarding the indicator lamps Cooling fan is not operating Regarding the indicator lampsIt is time to clean the air ﬁlter There is a possibility that the interior portion Signal cables are not correctly connected Electrical power cord is not pluggedPower switch is not set to the on position Signal source does not correctly work Color settings are not correctly adjusted Volume is adjusted to an extremely low levelAudio setting is not correct Color Space setting is not suitable Whisper function is working Not properly adjustedEither the focus and/or horizontal phase settings are Lamp is approaching the end of its product Lifetime Audio input Communication port SpeciﬁcationRGB input Video input Audio output Speciﬁcations 246mm 306mm 83mm 97mm 102mmPage Intended Use

3M X55I manual Connecting power supply

Models: X55I

Connecting power supply