3M X55I manual TV  Film  Turn OFF, Progressive, LOAD1  LOAD2  LOAD3  LOAD4, MY Memory

3M™ Digital Projector S55i/X55i

Multifunctional settings

PICTURE Menu (continued)

Item

Description

	Using the buttons ▲/▼ switches the progress mode.
	TV  FILM  TURN OFF
	• This function is performed only for an interlaced signal of a VIDEO
	input, an S-VIDEO input or CONPONENT VODEO input of 525i
PROGRESSIVE	(480i) or 625i (576i) signal.
	• When TV or FILM is selected, the screen image will be sharp.
	FILM adapts to the 2-3 Pull-Down conversion system. But these
	may cause a certain defect (for example, jagged line) of the picture
	for a quick moving object. In such a case, please select TURN OFF,
	even though the screen image may lose the sharpness.
	Selecting a mode of MY MEMORY using the buttons ▲/▼ and then
	pressing the button ► or the ENTER button performs each function.
	LOAD1  LOAD2  LOAD3  LOAD4
	SAVE4 SAVE3  SAVE2  SAVE1
	This projector has 4 numbered memories for adjustment data.
	Performing the LOAD1, LOAD2, LOAD3 or LOAD4 loads the data on
MY MEMORY	the memory whose number corresponds to the command’s number,
	and adjusts the picture automatically depending on the data.
	Performing the SAVE1, SAVE2, SAVE3 or SAVE4 saves the current
	adjustment data on the memory whose number corresponds to the
	command’s number.
	• The current adjustment data of the items in the PICTURE menu is
	stored, except for the adjustment data in the CUSTOM modes for
	the GAMMA and COLOR TEMP items.
	• There may be some noise and/or the screen may flicker for a
	moment when data is loaded to memory. This is not a malfunction.

© 3M 2005. All Rights Reserved. 29