3M X55I manual Screen Menu, Start UP, MyScreen Lock

3M™ Digital Projector S55i/X55i

Multifunctional settings

SCREEN Menu (continued)

Item

Description

	Using the buttons ▲/▼ switches the mode for the start-up screen.
	The start-up screen is a screen displayed when no signal or an
	unsuitable signal is detected.
	MyScreen  ORIGINAL  TURN OFF
	MyScreen is a screen you can register as a desired screen.The
START UP	ORIGINAL screen is the existing standard screen. When TURN
	OFF is selected, the BLACK screen is used.
	• To avoid remaining as an afterimage, the MyScreen and the
	ORIGINAL screens will change to the BLANK screen after several
	minutes. If also the BLANK screen is the MyScreen or ORIGINAL, it
	will change to the BLACK screen.
	• For the MyScreen, please refer to the item MyScreen below. For
	the BLANK screen, please refer to the BLANK item (35).
	This item functions for capturing the MyScreen of the blank screen
	and the start-up screen. Please execute displaying the input
	including the picture you want to capture.
	1. Selecting this item displays a dialog titled “MyScreen”. It will ask
	you if you start capturing the picture from the current screen.
	Please wait for the target picture to be displayed, and press
	the ENTER button on the remote control when the picture is
	displayed. The picture will freeze and the frame for capturing
	appears.
	To stop performing, press the RESET or ESC button on the
	remote control.
MyScreen	2. Using the buttons ◄/►/▲/▼ adjusts the frame position. Please
	move the frame to the position of the picture which you want to
	use.
	The frame may not be able to be moved for some input signals.
	To start registration, press the ENTER button on the remote
	control.
	To restore the screen and return to the previous dialog, press the
	RESET or ESC button on the remote control.
	Registration takes several minutes. When the registration is
	completed, the registered screen and the message “MyScreen
	registration is finished.” are displayed for several seconds. If the
	registration failed, the message “A capturing error has occurred.
	Please try again.” is displayed.
	Using the buttons ▲/▼ turns on/off the MyScreen lock function.
MyScreen Lock	TURN ON  TURN OFF
	When the TURN ON is selected, the item MyScreen is locked. Use
	this function for protecting the current MyScreen.

36 © 3M 2005. All Rights Reserved.