4XEM IPCAMWPTZ manual Available Parameters on the Server, Nosync

[nosync=<value>&]<parameter>=<value>

[&<parameter>=<value>…][&return=<return page>]

parameter	value	description
nosync	0, 1	Specifies that there should be no sync (write) of
		the corresponding configuration file on flash. If
		parameter is omitted, a sync write will occur.
		(note: this parameter must be put at begin of
		parameter list)
<group>_<name>.	value to assigned	Assign	<value>	to	the	parameter
		<group>_<name>..
return	<return page>	Redirect to the page <return page> after the
		parameter is assigned. The <return page> can be
		a full URL path or relative path according the the
		current path. If you omit this parameter, it will
		redirect to an empty page.
		(note: The return page can be a general HTML
		file(.htm, .html) or a server script executable
		(.vspx) file. It can not be a CGI command. It can
		not have any extra parameters. This parameter
		must be put at end of parameter list)

Example: Set the IP address of server to 192.168.0.123

http://myserver/cgi-bin/admin/setparam.cgi?Network_IPAddress=192.168.0.123

Available Parameters on the Server

Group: System

NAME	VALUE		DESCRIPTION
hostname	<text string	shorter	host name of server
(r/w)	than 15 characters>
ledoff	0		Do not turn of the led indicator
(r/w)
	1		Turn off the led indicator
		- 65 -