7.To calibrate with the different weight, change the displayed value using the 10-key pad.

‰If you hit the wrong number, press the C key. The value returns to the capacity and enter again.

8.Place the calibration weight on the pan with the same value as displayed, and wait until the STABLE annunciator turns on.

9. Press the ENT key. The scale calibrate SPAN and end will appear. Remove the weight from the pan,

and turns the power off.

-0002000.

-00end00

‰Note

The value set in step 7 will be cleared after the power is switched off.

If the scale will suppose to move to another location, set the gravity acceleration value for the current location and calibrate the scale according to the procedure above. See the next section to set the value.

10-2. Gravity acceleration correction

When the scale is first used or has been moved to different place, it should be calibrated using a calibration weight.

But if a calibration weight is not available, the gravity acceleration correction will compensate the scale. Change the gravity acceleration value of the scale to the value of area where the scale will be used. Refer to the gravity acceleration map appended to the end of this manual.

‰Note

It is not necessary to set the gravity acceleration correction when calibrating the scale with a calibration weight at the place where it is to be used.

1. At step 3. of the previous section “10-1. Calibration

-0098050.

using a weight”, enter a new value using 10-key pad.

 

‰The integral part “9” is fixed and enter the value after the decimal point.

‰If you hit the wrong number, press the C key. The value returns to the original number. Enter again.

2.Press the displayed.

ENT

key, then the

Cal 0

will be

-00Cal00

3.If necessary to calibrate the scale using a calibration weight, go to step 5 of “10-1. Calibration using a weight”. To finish the setting, turn the power off.

23

Page 24 Page 26
Page 25
Image 25
A&D FS-30Ki, FS-15Ki, FS-6Ki manual 0002000, 0098050, Gravity acceleration correction
Page 24 Page 26

FS-15Ki, FS-6Ki, FS-30Ki specifications

A&D FS-30Ki, FS-6Ki, and FS-15Ki are high-precision digital scales designed to cater to a variety of weighing needs across different environments. Manufactured by A&D Company, Ltd., a pioneer in measurement and control technologies, these scales come equipped with a range of advanced features that enhance accuracy, usability, and durability.

The FS-30Ki is notable for its impressive capacity and precision, capable of handling weights up to 30 kilograms with a readability of 1 gram. This makes it ideal for industries such as food service, laboratory research, and logistics where precise measurements are critical. The scale also boasts a large, easy-to-read LCD display that provides clear readings, even in varying lighting conditions.

On the other hand, the FS-6Ki is designed for lighter weighing tasks, with a maximum capacity of 6 kilograms and a readability of 0.1 gram. Its compact size and lightweight design make it a perfect fit for smaller workspaces, making it suitable for craft shops, culinary applications, and healthcare settings where precise dosing is essential.

The FS-15Ki offers a middle ground, with a capacity of 15 kilograms and a readability of 0.5 grams. This versatility allows it to be utilized in diverse environments including educational institutions and industrial applications.

All three models incorporate A&D’s advanced “Easy Calibration” technology, which simplifies the calibration process, ensuring consistent accuracy over time. Additionally, they feature built-in overload protection, safeguarding the scales against damage from excessive weights.

Another significant characteristic of the FS series is their user-friendly interface, which allows for quick and easy operation. Each model includes multiple weighing modes, including tare functionality, which lets users subtract the weight of containers for net weight measurements.

These scales are also designed for durability, featuring a solid construction that can withstand everyday use in various settings, from bustling kitchens to laboratories. The scales are powered by AC power or batteries, allowing for versatile placement and portability.

In summary, A&D FS-30Ki, FS-6Ki, and FS-15Ki scales are an excellent investment for professionals demanding reliability and precision in their weighing tasks. Their combined features of ease of use, advanced technology, and robust design make them suitable choices for a wide range of applications.
Top Page Image Contents