HV-WP/HW-WP Series Page 45 15. The Function Table
Item Display Meaning and purpose Ａ
f6 5 When the display value becomes stab le, the scale compares the
display value. It does not compare on an unstable condition. A
A
f6 6
When the display value becomes stable when not nearly-zero
after pressing the SET switch, the scale compares th e display value.
It does not compare on an unstable condition. If the SET switch is
pressed again, the scale stops the comparison.
A
A
A
f6 7 When the display value becomes stable when not nearly-zero,
the scale compares the value. A
A
f6 8 Simple batch function. (Refer to section 13.) Ａ
Comparator
f6 9 Full/dribble batch function. (Refer to section 12.) Ａ
The condition of the buzzer on option OP-03 by comparator
function or full/dribble batch function.
Ａ
Ａ
f7 0 # No buzzer. Ａ
f7 1 The buzzer sounds at LO. Ａ
f7 2 The buzzer sounds at OK. Ａ
f7 3 The buzzer sounds at LO and OK. Ａ
f7 4 The buzzer sounds at HI. Ａ
f7 5 The buzzer sounds at LO and HI. Ａ
f7 6 The buzzer sounds at OK and HI. Ａ
f7 7 The buzzer sounds at LO, OK and HI. Ａ
Buzzer
f7 8 The buzzer sounds at finishing the full/dribble batch process. Ａ
The condition of the accumulation function Ａ
f8 0 # Accumulation function not used. A
f8 1
The scale accumulates the data, if the F switch is pressed, when
the display becomes a positive stable value without nearly-zero.
Next accumulation can be performed after the display becomes
nearly-zero or a negative value.
A
A
A
A
f8 2
The scale accumulates the data, if the F switch is pressed, when the
display becomes a stable value without nearly-zero. Next
accumulation can be performed after the display becomes nearly-
zero.
A
A
A
f8 3
When the display becomes a positive stable value, the scale
accumulates the data automatically. Next accumu lation can be
performed after the display become s near ly -zer o or a neg ativ e val ue.
A
A
A
f8 4
When the display becomes a stable value, the scale accumulates
the data automatically. Next accumulation can be preformed after
the display becomes nearly-zero.
Use Recording number and mass of articles removed form the
weighing pan. (Put articles on the weighing pan. Press
TARE switch at each removal.)
A
A
A
A
A
Accumula-
tion func-
tion
f8 5
At each finish of the full/dribble batch function, the scale
accumulates the data automatically.
Use Packing articles like a powder. used for recording the bag
number and total mass.
A
A
A
A
The "#" is factory settings. The "nearly-zero" is within ±4 digits from zero point in the un it of kg.