A&D SF/SG instruction manual Err tr, Setting Unit Price

SF/SG Series Operating Instructions

Note about keyboard TARE:

1.If you enter a tare weight greater than the weighing capacity of the scale an error message will display: “ Err tr ”

2.When a TARE weight has been set, it is not possible to set a new TARE weight of a lower value by the instructions above. It is necessary to delete the previous TARE first, before entering a TARE of lower value.

Example

WEIGHT	UNIT PRICE		PRICE
0.000	------		Err tr
NET ZERO
3. Any previous TARE entries will be cancelled when the		0	key is pressed.
		ZERO

4.To cancel a TARE weight that has been entered, remove any weight from the weigh pan

and press

T

TARE

4.Setting Unit Price

1.Enter Unit Price by 10 key pad. Up to 6 digits may be entered.

The example below shows the entry of a unit price of $5.50:

WEIGHT	UNIT PRICE	PRICE
0.000	5.50	0.00

NET ZERO

2.Unit price entry must be completed within 3 seconds. Any delay beyond 3 seconds will require the unit price to be re-entered.

7