SF/SG Series Operating Instructions
1. Zero Point Adjustment
The zero point is automatically adjusted when power is turned on. If the display shows a positive or negative weight, the scale must be
How to re-zero:
1.Assure that nothing is on the weigh pan.
2.Press 
0 
ZERO
3. “ 0 ” should appear on the weight display
| Table top type | Tower type |
ZERO | 0.000 | 0.000 |
NET |
|
|
|
| NET ZERO |
2. Tare Adjustment
When weighing with a container, it is necessary to TARE out the weight of the container in order to get an accurate price/weight reading.
How to operate TARE:
1.Place empty container (100g) on the weigh pan. Display reads “ 100 ” :
2.Press T
TARE
3. The weight display display should read:
Table top typeTower type
NET
0.0000.000
ZERO 
NET ZERO
4. When removing the weight from the pan the display reads “
Note:
When a TARE weight has been set, it is not possible to set a new TARE weight of a lower value by the instructions above. It is necessary to delete the previous TARE first, before entering a TARE of lower value.
5
