A&D UA-787 manual Setting the Alarm

TAKING YOUR BLOOD PRESSURE

Setting the Alarm

The UA-787 Quick Response monitor allows you to set up to three alarms per day to notify you when to take your blood pressure. To set the alarm(s):

1. Press and hold the clock button until the digits start blinking. Then press and release the memory button. "P-1" will be shown at the middle of the display screen indicating that this is the first alarm.

NOTE: If you do not wish to set an alarm, press the mem- ory button several times to return to the main screen or allow the display to disappear after 30 seconds.

2.Select the hour using the START button and press the

clock button to set the hour and move to the minute selection. After selecting and setting the minute, press the memory button to complete the alarm setting.

3.The display will move onto the second alarm setting and conclude with the third alarm setting. Repeat the previous step if you need a second or third alarm.

When the alarm is set, a "P" will appear on the main screen. If you do not see a "P" on the main screen, press the clock button to activate the alarm function. When the alarm sounds, it will last for one minute. To turn the alarm off immediately, press the START button.

NOTE: To deactivate the alarm function, simply press the clock button once. You can reactivate the alarm function by pressing the clock button again.

In Canada - Auto Control Medical (Toll-Free): 1-800-461-0991 E-7