ABOUT MEMORY
NOTE: This device stores the last 90 measurements in memory. The data is retained as long as the batteries are in the device. When you remove the batteries or the batteries are drained, the data will be erased.
1.Press the MEMORY button.
2.The average data of all the measurements and the number of measurements stored are displayed.
Then, each time the MEMORY button is pressed, the memory data is displayed starting from the most recent. After the last reading is displayed, the display returns to the clock display.
3.To recall AM/PM readings, press:
MEMORY + AM button
Press the
MEMORY button
Averaged Systolic
Averaged Diastolic
Number of Readings
Average of all readings
Average of total AM measurements stored is displayed. Each time the AM button is pressed, the memory data taken during the AM is displayed starting from the most recent. After the last measurement is displayed, the display returns to the clock display.
MEMORY + PM button
Average of total PM measurements stored is displayed. Each time the PM button is pressed, the memory data taken during the PM is displayed starting from the most recent. After the last measurement is displayed, the display returns to the clock display.
If the MEMORY button is pressed again, the display returns to the average data of all the measurements.
Clearing the memory data
4.Press and hold the MEMORY button until the “
” (memory) mark blinks to clear the stored data.
In Canada - Auto Control Medical |
