A&D UA-853 manual ? What Display Symbols Mean, Display Condition/Cause Recommended, Action

?WHAT DISPLAY SYMBOLS MEAN

Display/		Condition/Cause	Recommended
Symbol			Action
		The symbol shown while measure-	Measurement is in progress,
		ment is in progress. It blinks while
			remain as still as possible.
		detecting the pulse.
		An irregular heartbeat or body
		movement may have occurred.	Take measurement again and
		Refer to page E-11 for more infor-
			consult with your physician.
		mation on irregular heartbeats.
		Previous measurement stored in
		MEMORY.
		The battery power indicator during	Replace all batteries with new
	Battery Full	measurement.
		The batteries are low when it	ones when the symbol blinks.
			Alkaline batteries recommended.
		blinks.
	Battery Low
		Unstable blood pressure due to	Try the measurement again.
		excessive body movement.	Remain very still during the
			measurement.
		The systolic and diastolic values are	Fasten the cuff correctly, and try
		within 10 mmHg of each other.
			the measurement again.
		The pressure value did not increase	Check for air leaks along the
		during inflation.	tube and around the air socket.
		The cuff is not fastened correctly.	Refasten the cuff and retake mea-
			surement.
		There is an air leak in the cuff or	Make sure tube is properly con-
		monitor.	nected to cuff and monitor.
			Try the measurement again.
		The pulse is not detected correctly.	Remain very still during the
PULSE DISPLAY ERROR			measurement.
		Cuff Inflation Meter	Measurement is in progress,
			remain as still as possible.
		Pressure Rating Indicator™	Refer to the section “About
			Pressure Rating Indicator” for
			further explanation.
		The alarm is turned on.	Press AM button once to turn
			alarm off.

E-2 ? LifeSource Health Line (Toll-Free): 1-888-726-9966