?HOW UA-853 WORKS
LifeSource® blood pressure monitors are easy to use, accurate and digitally display full measurement readouts. Our technology is based on the “oscillometric method” – a noninvasive blood pressure determination. The term “oscillation” refers to any measure of vibrations caused by the arterial pulse. Our monitor examines the pulsatile pressure generated by the arterial wall as it expands and contracts against the cuff with each heartbeat.
The cuff is inflated until the artery is fully blocked. The inflation speed is maximized and the pressure level is optimized by the device. The monitor takes measurements while the cuff is both inflating and deflating. This results in a faster measurement providing greater comfort to the user.
AM/PM TimeWise™ Technology
This monitor automatically stores each measurement as an AM or PM reading in memory (note: clock must be properly programmed before initial use). Healthcare providers agree that understanding your AM and PM readings can assist in the proper diagnosis and management of your heart health through lifestyle and/or medication modifications.
BEFORE YOU START
You must install 4 type AA (1.5 volt) batteries (alkaline batteries recommended), or use the AC Adapter (see page
1.Remove battery compartment cover by gently pushing down on arrow and sliding cover forward.
2.Put in bottom row of batteries first. Place the batteries in compartment with positive (+) and negative
Step 2
Step 1
Step 3
3.Replace cover by sliding it into the compartment and gently pressing into place.
| NOTE: Rechargeable batteries will not work with this monitor. |
LifeSource Health Line |
