Display Symbols

Ready/Complete symbol.

This symbol is displayed when the measurement display is stable. Low battery indicator.

If this symbol is displayed, replace all four batteries with new ones.

Installing (or Replacing) Batteries

Caution

„Insert each battery with its positive (+) and negative (-) terminals properly aligned with the corresponding symbols in the battery compartment.

„Improper installation of the batteries may cause battery leakage.

„Replace all four batteries with new ones, when the symbol is displayed.

„Do not mix new and used batteries. It may cause damage to the scale or shorten battery life.

„The battery life is dependant upon the environmental temperature, battery type and usage.

„Remove the batteries from the battery compartment, when the scale is not to be used for a long time. They may leak and damage the scale.

Steps for Installing (or Replacing) Batteries

1. Remove the battery compartment cover on the underside of the scale by gently pushing the hook in the direction indicated by the arrow and lifting the cover backward.

2. Install four new batteries with the positive (+) and negative (-) terminals properly aligned with the corresponding symbols in the battery compartment.

3.Replace the cover by sliding it into the compartment and gently pressing into place.

3

Page 4
Image 4
A&D UC-321PBT-C instruction manual Display Symbols, Steps for Installing or Replacing Batteries