A&D UC-321PBT-C instruction manual

Pairing The PBT-C Series Device With a Continua-Compliant Manager

Model UC-321PBT-C is a PBT-C series device. PBT-C series devices are designed to be connected only with Continua Managers.

To pair the device with a Manager, please follow these steps:

1.Remove the four AA batteries from the device.

2.Discharge the device completely by trying to take a measurement. Press the “Measurement” switch, tap the toe switch, or tap the surface of the device as appropriate.

Note: the measurement will not proceed and the LCD will remain blank.

3.Insert the four AA batteries back into the device.

4.Refer to the Manager’s instruction manual to start a Bluetooth discovery and inquiry process.

The device will stay discoverable for 60 seconds following battery insertion. If the Manager fails to pair with the device, repeat steps 1 through 3.

5.Once the manager has discovered the device, enter the PIN “123456” as a password to finish the pairing process.

When the Manager supports SSP (Secure Simple Pairing), no password is required for the pairing process.

A device that has been certified by Continua displays this logo.

A Bluetooth device has the logo mark of Bluetooth printed on it.

The RoHS (Restriction of Hazardous Substances)

Directive

4