Transmitting Data to a Continua Manager

Measurement results will be automatically transmitted to the paired Manager at each measurement. In the case of unsuccessful transmission, the device stores the last 25 measurements in memory. The device will send all of the data at the next successful connection and clear memory.

Before Requesting Service

 

 

Problems

Corrective Action

Nothing is displayed by pressing the

Check the battery installation.

measurement switch.

Replace all four batteries with new ones.

“88888” remains displayed.

Remove and reinstall the batteries.

“e- 0” is displayed.

Place the scale on a solid level surface.

The difference between an estimated

Remove any foreign objects that might

weight and a measured weight is

be touching the bottom of the scale.

excessive.

When the scale is placed on a carpet, be

 

 

 

sure that the add-on feet are attached or

 

 

 

try moving the scale to a level surface

 

 

 

such as tile or wood.

 

 

is displayed.

Replace all four batteries with new ones.

 

 

 

 

 

 

If you can not locate and fix the problem, contact your supplier, or the A&D service group. The A&D service group will support authorized suppliers with technical information, spare parts and units.

9

Page 10
Image 10
A&D UC-321PBT-C instruction manual Transmitting Data to a Continua Manager, Before Requesting Service