Fig. 4b Lifting cover from body of stove

Fig. 4c Unscrewing

MULTI - PURPOSE OPERATINGTOOL
Your Aarrow fire comes with a multi-purpose tool,
which is used for riddling, setting the multifuel
grate position. Use the operating tool for setting the
grate in the coal burning position or the wood
burning position. This lever is also used for
de-ashing and riddling see page 13 (multifuel
stoves only) and for emptying the ash pan. (Fig. 5)
Fig. 5 Operating tool and ashpan
FIRE DOOR GLASS
In the event of the door glass being broken it can
easily be replaced. This should be done when the
appliance is cold and unlit:
•The door(s) should be lifted off the hinges so that
the below operations can be carried out on a
workbench or similar level surface.
•Unscrew the two nuts, on the inside of the door
securing the retaining clips.
•Carefully remove any pieces of broken glass, and
sealing gasket wearing suitable gloves.
•Re-place the gaskets and line them up in
relation to the door frame. (Fig.6)
Fig. 6 Lining up the gasket
•Re-seat the new glass, ensuring the sealing gasket
is flat and in contact with the glass. (Fig.7)

Fig. 7 Fitting door glass

•Replace the two retaining clips and nuts. Do not
over-tighten the nuts as damage may occur to the
glass (Fig.8) Re-place the door(s) carefully over
the hinges and slot in place.

Fig. 8 Tightening glass clips

Sherborne Wood & Multifuel Stoves 9
OPERATING INSTRUCTIONS