![](/images/new-backgrounds/1330806/33080631x1.webp)
Installation and Setup
Inline Power Not Provided
If your network does not provide 802.3af compliant
1.On the top of your phone, connect the Ethernet cable (provided with your phone) into the network port marked with LAN.
2.On the PoE power injector, plug the other end of the Ethernet cable into the network jack marked as indicated in the following illustration.
3.On the PoE power injector, connect an additional Ethernet cable into the network port as indicated in the following illustration.
4.Plug the other end of the Ethernet cable into the network jack on the wall.
5.Plug the PoE power injector into a power outlet.
Ethernet | To Power over Ethernet (PoE) | |
Cables | ||
|
Network Jack
Power Outlet |
|
| PoE | |||
|
|
| Power injector | |||
|
|
| (if Inline power is | |||
|
|
| not provided) | |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
To Network
To Phone
Jack
Note: You should connect the power supply to a surge protector or power bar. All Ethernet cables used must be category 5/5e
10Model 6739i IP Phone Installation Guide