Aastra Telecom 6739I manual Line/Call Appearance Keys, Using a Headset with your Telephone

Speaker/ Headset

Other Phone Features

Line/Call Appearance Keys

The 6739i has 3 hard/line call appearance keys each with a corresponding status light. Additional line call appearances may also be set up on your phone as softkeys.

These line/call appearance buttons and lights represent physical lines or calls for your extension. By pressing a line call appearance button, you connect to the line or a call it represents. The line call appearance light indicates the status of that line or call.

When the phone is taken off-hook, the phone will automatically select a line for you.

Line Call Appearance LED Status	Description
OFF	Indicates idle line or no call
	activity
Rapid Flash	Indicates ringing on the line.
Slow Flash	Indicates a call is on hold.

For more information about the Line Call Appearance keys, see the Aastra Model 6739i IP Phone User Guide.

Using a Headset with your Telephone

The 6739i accepts standard and DHSG headsets through a modular port on the back of the phone. Contact your telephone equipment retailer or distributor to purchase a compatible headset. A non-amplified headset is required. Customers should read and observe all safety recommendations contained in headset operating guides when using any headset.

Note: For best headset performance, Aastra recommends non-amplified headset equipped with modular connector.

Making and Receiving Calls using a Headset

1.Ensure that you have selected a headset audio mode by accessing the Options menu. See the section "Set Audio" on page 16 for detailed information.

2.Plug the headset into jack.

3. Press the key to obtain dial tone or answer an incoming call.

Depending on the audio mode selected from the Options menu, dial tone or an incoming call will be received on either the headset or the handsfree speakerphone.

4. Press the key to end the call.

18Model 6739i IP Phone Installation Guide