IP Phone Release Notes 1.4.1
New Features in 1.4.1
Using the Reset Command
The <ExecuteItem URI =""/> tag can be entered with the command the phone should execute. Upon receiving an AastraIPPhoneExecute object, the phone begins executing the URL or URI specified.
The following example shows an AastraIPPhoneExecute object using the Reset command:
<AastraIPPhoneExecute>
<ExecuteItem URI="Command: Reset"/> </AastraIPPhoneExecute>
Note: If you specify a command as a URI attribute (instead of a URL), the keyword "Command" must be prepended in the value of the URI attribute so that the phone recognizes it as a URI attribute value. If you enter a URI and leave out the “Command” keyword, the phone interprets the value in the URI attribute as a URL containing network resources.
The following example shows the AastraIPPhoneExecute object using a URL:
<AastraIPPhoneExecute>
<ExecuteItem URI="http://aastraserver/message.xml"/> </AastraIPPhoneExecute>
When the phone receives this object, it displays the specified XML URI page.
Using the NoOp Command
You can use the AastraIPPhoneExecute object as an object to create a blank display (it has no affect on the IP phone). It is made up of a blank URI. You can use this feature when you need to press a key on the phone to access a feature, and it is not necessary to display anything.
The following example shows an AastraIPPhoneExecute object using a blank URI:
<AastraIPPhoneExecute> <ExecuteItem URI=””/>
<AastraIPPhoneExecute>
24 |
