Section 7 - Troubleshooting
Figure 7.1 Troubleshooting Guide |
| |
Symptom | Possible cause | Solution |
No sound | • incorrect audio cable connections | • connect the cables correctly |
| • incorrect amplifier operation | • make sure that the input selector on the amplifier is set to |
|
| the desired source |
Sound with no bass | • check speaker connectors are not | • check polarity using the AMR test CD and correct if |
and generally strange | connected with wrong polarity | required |
Sound is too bright or | • Incorrect placement of speaker | • Place speaker with high frequency driver upright and at / |
dull |
| ear hight, pointing at the listening position |
| • Incorrect adjustment of HF Level | • Adjust HF level as per Appendix A |
Bass is too full or lean | • Incorrect placement of speaker | • Place speaker correctly as per Section 2 |
| • Incorrect use of port inserts | • Add (if too full bass) or remove (if too lean bass) port |
|
| inserts as required |
Other problems |
| • go to the Contents section and |
|
| or contact your nearest AMR distributor/dealer |
23
