POSITIONING THE SYSTEM
6.Position the system a minimum of 18” (Inches) from the doorframe and on the side closest to the door handle.
7.Cut the rubber molding to the length that will allow it to cover the wire from the wall to the system. You must cover the wire, using a metal pancake molding If the wire is in an area where it will be walked upon.
8.Insert the system power wire into the rubber pancake molding through the slit on the back. Using double sided tape fasten the rubber molding to the floor.
9.Plug the power supply into the closest outlet. We do not recommend using an extension cord for the system.
10.Test the system by placing one of the hard tags into the system. The system will beep approximately
alarm.
abcoffice | 3 |
www.abcoffice.com |