BIOS Setup

3-11

 

 

sequence of the drive selected. Set [Boot Other Device] to [Enabled] if you wish to boot from another device other than these three items.

Swap Floppy Drive:

This item can be set as Disabled or Enabled. The default setting is Disabled. When this feature is enabled, you don’t need to open the computer case to swap the position of floppy disk drive connectors. Drive A can be set as drive B and drive B can be set as drive A.

Boot Up Floppy Seek:

When the computer boots up, the BIOS detects if the system has a FDD or not. When this item is set to Disabled, if the BIOS detects no floppy drive, it will display a floppy disk drive error message. If this item is disabled, the BIOS will skip this test. The default setting is Disabled.

Boot Up NumLock Status:

This item determines the default state of the numeric keypad at system booting up.

[On]: The numeric keypad functions as number keys.

[Off]: The numeric keypad functions as arrow keys.

Security Option:

This item determines when the system will prompt for password - every time the system boots or only when enters the BIOS setup.

[Setup]: The password is required only when accessing the BIOS Setup.

[System]: The password is required each time the computer boots up.

To disable security, select Set Supervisor Password at main menu and then you will be asked to enter the password. Do not type anything and just press the <Enter> key and it will disable security. Once security is disabled, the system will boot and you can enter the BIOS setup menu freely.

NOTE: Don’t forget your password. If you forget the password, you will have to open the computer case and clear all information in the CMOS before you can start up the system. But by doing this, you will have to reset all previously set options.

APIC Mode:

Leave this item to its default setting.

MPS Version Ctrl For OS:

This item specifies which version of MPS (Multi-Processor Specification) this motherboard will use. The options are 1.1 and 1.4. The default setting is 1.4. If you use an older OS for dual processor executing, please set this option to 1.1.

OS Select For DRAM > 64MB:

This item allows you to access the memory that is over 64MB in OS/2. Leave this item to its default [Non-OS2] setting for operating system other than OS/2.

User’s Manual

Page 45
Image 45
Abit NF7-M, NF7-S2G Swap Floppy Drive, Boot Up Floppy Seek, Boot Up NumLock Status, Security Option, Apic Mode

NF7, NF7-S2G, NF7-M, NF7-S2, NF7-S specifications

The Abit NF7 series of motherboards, which includes the NF7-S, NF7-S2, NF7-M, NF7-S2G, and NF7, is renowned for its performance, stability, and advanced features tailored for AMD processors during the early 2000s. These boards were particularly popular for enthusiasts and gamers seeking to build high-performance systems with the nForce2 chipset, which significantly enhanced system capabilities.

The NF7-S, the flagship model, stood out due to its comprehensive feature set. It supported a broad range of AMD processors, including the Athlon XP and Duron, which made it an appealing choice for various users. One of its main attractions was the dual-channel memory technology, permitting up to 2GB of DDR RAM, effectively doubling memory bandwidth and improving performance in memory-intensive applications.

Another significant feature of the NF7-S was its integrated Universal Audio Codec, delivering high-quality sound without the need for a separate sound card. Additionally, it offered a fast 133MHz FSB (Front Side Bus), enabling remarkable speed in data transfer, thereby enhancing the overall system performance. The motherboard also featured several expansion slots, including AGP 8x and PCI slots, allowing users to install a range of graphics cards and peripherals.

The NF7-S2, a slightly reduced version, maintained many capabilities of the NF7-S while providing essential features suitable for budget-conscious builders. It came with single-channel memory support but still leveraged the strengths of the nForce2 chipset, ensuring solid performance for general computing and light gaming.

The NF7-M was tailored for micro-ATX systems, representing a compact solution for those who needed a smaller footprint without sacrificing performance. With similar specs to its larger counterparts, it also supported dual-channel memory and offered significant connectivity options.

The NF7-S2G included integrated graphics capabilities, catering to users who preferred a more straightforward setup without dedicated graphics cards. This model offered a great balance for everyday computing tasks and casual gaming.

In summary, the Abit NF7-series motherboards were pivotal in advancing desktop performance during their time, providing users with robust options filled with innovative technologies and a variety of features designed for different needs, solidifying their legacy in the history of computer hardware.