Specifications, Analog Inputs and Outputs

AIM-16 Manual

Specifications

•Input Channels: 16 Differential Analog Input Channels per AIM-16.

•	Output Channels:	Analog Output assignable to 1 of 8 Output Channels.
•	Common Mode Rejection:		125 db for gains above 100.
			90 db for gain = 1.
•	Output Rating:	5mA at ±10VDC or ±5VDC.
•	Gain Nonlinearity:	±0.005%.
•	Temp. Coefficient:	5 ppm/ °C.
•	Overvoltage:	Continuous: 70V peak-to-peak, 35VDC.
•	Sensors:	Thermocouples, with break detect provided.

•RTDs, with excitation and offset provided.

•Strain gages, with ratiometric outputs.

•Voltage and current inputs.

•	Reference Junction:	Temperature Scale Factor: +24.4mV/ °C., 0.0VDC @ 0 °C.
		Reference junction temperature output assignable as an input to
		Analog Input Channel #0, or to any Output Channel.
•	Preamplifier:	12 Analog Gains ranging from 0.5 to 1000.

•Programmable gains selected by computer, channel by channel.

•Manual gains selected by DIP switch one gain setting for all channels.

•Three TTL digital inputs for gain selection.

• Control Inputs:

Four TTL digital inputs for channel selection.

•Terminations: Analog inputs: Plug-on screw terminal blocks for 12-22 AWG wire.

• Digital Input/Analog Output: 37-pin Sub-D connector.

•	Operating Temp:	0 °C. to 65 °C.
•	Storage Temp:	-40 °C. to + 100 °C.
•	Humidity:	0 to 90% RH non-condensing.
•	Size:	8.0 inches long, 4.75 inches wide, 0.75 inches high.
•	Power Required:	+5VDC:	20mA typical, with option P, DC to DC converter,
		+5VDC:	125mA max..
		+12VDC:	10mA typical.
		-12VDC:	10mA typical.

Page 1-2

Manual MAIM-16.D1d