EtherHub 1500 System
Menu | Description | (continued) |
Threshold | Provides 5 | |
| This menu allows you to set threshold levels for the hub or port in terms of frames | |
| received, number of bytes, collisions, CRC errors, alignment errors and total errors. | |
System Menu
Menu | Description |
|
|
Information | Displays EtherHub system information. |
|
|
Configuration | Modifies various parameter settings necessary for communicating with |
| the management agent. |
|
|
Trap Managers | Selects management stations to receive trap messages from the system. |
|
|
Download | Downloads a binary file to the SNMP agent. |
|
|
Restart | Resets the SNMP agent. |
|
|
Factory Settings | Reverts all configuration settings to the original factory settings. |
Save Configuration | Saves the configuration changes made during the current session. |
|
|
Reset Configuration | Restores the last saved configuration. |
Displaying System Information - Use the Information command to display and modify system information about the EtherHub stack, or for quick system identification. View a description of the system, including:
Field | Description |
|
|
System Description | Name and version of the |
System Uptime | Length of time the EtherHub management agent has been running. |
|
|
System Name | Name assigned to the EtherHub system. |
|
|
Contact | Contact person for the system. |
|
|
Location | Specifies the area or location where the system resides. |
Advanced Reference Guide
Changing System Configuration - Use the Configuration command from the System Menu to modify current values for the following parameters:
Field | Description |
|
|
IP Address | IP address of the agent you're managing. The EtherHub system may |
| be run on SNMP protocol over UDP/IP transport protocol. In this |
| environment, all systems on the Internet, such as network interconnection |
| devices and Network Management Stations (e.g., the PC running |
| AccView) are assigned an IP address. |
|
|
MAC Address | Hardware address of |
Subnet Mask | Subnet mask of the agent you've selected. This mask identifies the |
| host address bits used for routing to specific subnets. |
|
|
Default Gateway | Default gateway used in passing trap messages from the EtherHub |
| agent to the management station. |
|
|
Default NMS | For internal use only. |
|
|
For internal use only. | |
IPX Frame Type | The selected format used on the LAN; i.e., type used by the IPX |
| network where the |
| type is not detected, the |
| current type. (Values: 802.3, Ethernet II, SNAP, 802.2) |
|
|
IPX Network Number | Identifies the IPX network number for the connected slot. You can |
| disable IPX protocol by setting this number to zero. |
Assigning Trap Managers - Use the Trap Managers command from the System Menu to modify current values for the following parameters:
4 | 5 |
