Print Server User’s Guide
62
Windows NT 3.51
This procedure must be carried out on every workstation requiring access to the Print
Server’s printers. The Print Server driver must be installed first.
Before proceeding, check the following:
• Printer(s) connected to the Print Server, and on-line.
• LAN is operational and using the NetBEUI protocol.
First Port Configuration
1. Go to Printer Manager. Select PrinterèCreate Printer.
2. Select the appropriate printer driver for the printer connected to the Print
Server’s first port.
3. In the Print to dialogue box, select PrintServer.
4. Click on Settings. The Configure Print Server window will appear. It will look
like the screen below.
Figure 19 NetBEUI Configuration (NT 3.51 PtP)
5. Enter the configuration information as described below:
Device Name Click Browse and select the correct Print Server. The
name should not be changed; it is only visible when
configuring the device.
Select Device Port Select the Print Server port that the printer is connected
to (e.g. Parallel port 1).
Port Name On multi-port devices, each port must have a unique
name (8 alpha-numeric characters). The Port Name will
be shown in the Printer’s properties. Use a name which
indicates the port used (e.g. Par_1)
Enable Banner Select this option to enable a banner page. The Banner
page contain the value in the User Name field.
PostScript If using a PostScript Printer and banner page is
enabled, enable this option. Not enabling this option
will cause errors in the print job.