Print Server User’s Guide
80
Set to Default
This button appears on many screens. Clicking it replaces the on-screen values with
the default settings. They are NOT saved until you click Save to Device. To set
ALL device values to the default, use the menu option InitDevice - Restore Factory
Default.
Save to Device
Clicking this will write any changed configuration information to the device,
updating the Print Server’s NVRAM configuration file. You should then use the
InitDevice menu option to Reset the device.
Printer Configuration
Clicking the Configuration button in the Printer Status window will reveal a window
like the following example. This button will be grayed out if the printer does not
support this option, or if the printer is busy printing.
Figure 39 Printer Configuration
Environment Variable
This list of printer configuration variables will vary from printer to printer.
Variable Value
Displays the current setting. To change the Variable Value (if Read Only is
NO) double click the line you wish to change, then enter or select a new
value.
Read Only
Indicates whether or not the environment variable is adjustable.